#ONE CLICK MINER HOW TO#
#ONE CLICK MINER MOD#
#ONE CLICK MINER DRIVER#
#ONE CLICK MINER PATCH#

ThatвЂ™s it, you have proper BIOS mod without making any unnecessary risks to your GPU.

Continue my Ethereum Mining Guide from : вЂњHow to Flash the new BIOS?вЂќ.

#ONE CLICK MINER PATCH#

Click Ok (depending on your memory type it will patch 1 or 2 different memory timings).

Open your original exported BIOS from GPU-Z.

Export your original BIOS with GPU-Z as explained in Ethereum Mining Guide at Chapter вЂњBIOS MODвЂќ.

This software recently got a database of almost all memory timings and allows you to change your GPU Memory timings in one click (it auto detects and replaces them). ItвЂ™s simple as that рџ™‚Дownload Polaris 1.6.5. Overclock and undervolt can be done trough software and we NEVER change those values in the BIOS, because it can brick your cards if you do. Now after you know the basics of BIOS mod, you really donвЂ™t need to know anything else cause we will only replace the Memory Timings in the GPU BIOS. There is nothing else you need to change. By changing how your memory behaves at higher clock rates (increase tick rate of timings) we can make the GPU calculate itвЂ™s operations faster.Д«y changing memory timings we can increase the hashrate, depending how fast the new timings are. In the GPU BIOS it is described how the GPU Memory should behave on specific clock rates.

Your miner software is using the memory of the GPU to make the calculations (hashrate you see in Claymore). Memory timings are the only part in the GPU BIOS that you need to change. The GPU core voltage should never be touched(in BIOS), people like to change the dynamic voltage to static ones (direct mV values) and that can cause GPU to get bricked if your PC freezes or you get random power outage. Those settings from anorak BIOSes are trying to be as general as possible and they are way over the actual limit of your GPU.

TDP(W) reduced by about 20% (it has no effect if you use software for Overclock/Undervolt).

GPU core clock rate reduced to 1100-1200 mhz.

#ONE CLICK MINER DRIVER#

voltage on memory reduced to 900mV because they canвЂ™t know if your GPU can run at 850mV or even 800mV, the reason is explained above (for most BIOSes this has no effect, your GPU driver will restore it to default settings).

NEVER CHANGE VOLTAGE AND CLOCK RATES IN BIOS.ДЄnorak BIOSes have only memory timings replaced and the power save BIOSes have: THERE ARE NO UNIVERSAL GPU SETTINGS, please follow the Overclock chapter in my Ethereum Mining Guide for the only right way to overclock and under-volt your GPUвЂ™s. And it makes no sense to do it if you have software like OverdriveNtool which gives you full access to GPU and itвЂ™s voltages and clock rates. It would be very dangerous to put voltage values and memory clock values in the BIOS, because one of the GPUвЂ™s could not handle it properly and you could even brick your card.

some GPU can run at 875mV on memory voltageДЄs you notice there is a wide range of possible GPU settings, even if they are the same GPU.

some GPU can run at 800mV on memory voltage.

some GPU can handle only 1950 mhz on memory.

There are many reasons to do it that way, because as you see in my Ethereum Mining Guide under Overclock section, the GPUвЂ™s donвЂ™t behave identical even if they are the same GPU they can give much different results.ДЇor example I have 50 Sapphire RX 570 4gb Elpida memory cards, they are all exact the same and the results I have from them:

In BIOS we need only to change Memory Timings.

#ONE CLICK MINER HOW TO#

There are various guides and tutorials how to BIOS mod your GPU and they are all very confusing and risky to use, especially if you accidentally use a BIOS that is not made for your GPU. The guide explains in detail everything you need to know about modding рџ™‚ What do you need to know about BIOS mod?ДЇirst read trough my Ethereum Mining Guide, till the 6. Yes this guide will teach you how to BIOS mod yourself with just 1 click. Follow first 5 chapters of AMD Ethereum Mining Guide before going to this guide!

One click miner